Bot errors and a small suggestion for improvement

<moderator> This comment is about the old CMP bot (order system and pattern recognition) I constantly take casino mining tasks. Today, there was almost nothing left to the 4000 rating (75 tasks completed), another problem occurred. The bot completed 3 tasks without errors, but stumbled on the 4th. First, a recognition error occurred on number 30. The bot asked a question about the number, I answered. Then it completed several more spins (it recognized the numbers without errors), 30 flew out again - again it did not recognize, after the answer it placed the chips - made a spin and that's it ... I waited for about 15 minutes, the bot still did not work, I had to stop it. As a result, my IPM dropped to 1900 (two err STAT errors were added). I ask you to return my rating to me, since I do not see my fault in this case. Now about the bot error. As I understand it, the bot selects the main number according to the algorithm and places chips on it, two neighbors vertically and two on the wheel. If according to the rules the main number is between 1 and 5 or higher than 33, then the bot does not place all the chips. In the first case (for example, the main number is 5), the bot places numbers 5, 8, 10 and 24. In theory, it should also place 2, but it does not. In the second case (let's take the number 36), numbers 33, 36, 13 and 11 are placed. It happily forgets about number 3. It also looks rather strange to place chips in numbers 26 and 32 (it loads these numbers decently), after numbers from 1 to 3 have fallen out. During the entire time of observing the bot (I definitely watched more than half of the games), these two numbers worked only 2 or 3 times. Well, a small suggestion from me (playing myself using the same method, I got a much better result). The game has started. None of the main 5 numbers have played, there may have been small wins, the credit has fallen below 250-300 - the whole game can be safely paused - this is almost a drain of 99% (for 75 games, 5 times the bot returned the credit to the initial 500, then there was a drain, and only 2 times it brought the matter to the stop win). If a large win followed, and the credit made a new maximum, it is better to keep the stop loss bar within 250-300 chips. Well, the closer to the stop win, the stop loss bar should be raised much faster, otherwise it turns out to raise the credit to 750-800 chips and a drain occurs, since the betting level remains very high to achieve the goal. For example, there are 75 chips left before the stop win and betting 5 or more chips on a number does not make sense, because only 2-3 will be enough. P.S. This is all my amateur vision, so please don’t kick me too hard (and please return the rating, I really want to read the remaining two parts that are closed to me).

Make it a rule to configure the BOT for each session for commercial reasons! This will reduce the risk of an error...

Well, the most interesting thing is that the bot worked without errors during the first three sessions, but stumbled on the 4th (all 4 sessions followed one after another).

<moderator> This comment is about the old CMP bot (order system and pattern recognition)

Andrey wrote: Make it a rule - for commercial reasons, configure the BOT for each session! This will reduce the risk of an error...

Configuring the bot = Configuring it for a specific casino table and it is done once and for all )))) only if errors are noticed, then you need to reconfigure it again usually either the browser flash player started working differently or the browser itself was updated or the casino changed something in its interfaces

Oleg wrote: I constantly take casino mining tasks. Today, there was almost nothing left to the 4000 rating (75 tasks completed), another problem occurred. The bot completed 3 tasks without errors, but stumbled on the 4th. First, a recognition error occurred on number 30. The bot asked a question about the number, I answered. Then it completed several more spins (it recognized the numbers without errors), 30 flew out again - again it did not recognize, after the answer it placed the chips - made a spin and that's it ... I waited for about 15 minutes, the bot still did not work, I had to stop it. As a result, my IPM dropped to 1900 (two err STAT errors were added). I ask you to return my rating to me, since I do not see my fault in this case. Now about the bot's error. As I understand it, the bot selects the main number according to the algorithm and places chips on it, two neighbors vertically and two on the wheel. If, according to the rules, the main number is between 1 and 5 or higher than 33, the bot does not place all the chips. In the first case (for example, the main number is 5), the bot places numbers 5, 8, 10 and 24. In theory, it should also place 2, but it does not. In the second case (let's take the number 36), numbers 33, 36, 13 and 11 are placed. It happily forgets about number 3. It also looks quite strange to place chips in numbers 26 and 32 (it loads these numbers decently), after numbers from 1 to 3 have fallen out. During the entire time of observing the bot (I definitely watched more than half of the games), these two numbers worked only 2 or 3 times. Well, a small suggestion from me (playing myself using the same method, I got a much better result). The game has begun. None of the main 5 numbers played, there may have been small wins, the credit fell below 250-300 - the whole game can be safely paused - this is almost a drain of 99% (for 75 games, 5 times the bot returned the credit to the original 500, then followed by a drain, and only 2 times brought the matter to a stop-win). If a large win followed, and the credit made a new maximum, it is better to keep the stop-loss bar within 250-300 chips. Well, the closer to the stop-win, the stop-loss bar should be raised much faster, otherwise it turns out to raise the credit to 750-800 chips and a drain occurs, since the betting level remains very high to achieve the goal. For example, there are 75 chips left before the stop-win and betting 5 or more chips on a number does not make sense, because only 2-3 will be enough. P.S. All this is my amateur vision, so please don't kick me too much (and please return the rating, I really want to read the remaining two parts that are closed to me).

All errStat errors have been reset, IPM is fine. Thank you for your comments on the bot's operation.

<moderator> This comment is about the old CMP bot (order system and pattern recognition) Yesterday, 28.06, the order did not work, the BOT began to clarify the dropped numbers. After it put not 0.1 chip but 0.5 in standby mode, I stopped it. All settings and number recognition were done immediately before that. What's the matter?